Salvaverde
2Pages

SALVAVERDE EXECUTION OF A DRIVABLE TURF SURFACE ADVANTAGES Execution of a reinforced lawn with the GEOPLAST SALVAVERDE grid in PE HD: Full protection of the grass lawn. Compression resistance of up to 350 tons / m2. Swift and easy installation with the double-overlap connection system. Non-slip upper contours. Suitable for parking, driveways, golf courses, etc. UV-resistant material. The grid’s regular shape makes grass growing even and homogeneous. A) Lay a 150 to 200 mm subbase of compacted gravel size 5-20 mm, compression resistance 35 N/m² (UNI 7549/7). B) Execution of the bedding for Geoplast SALVAVERDE with 30 to 40 mm of volcanic sand enriched with compost and organic fertilizers, particle size 0-5 mm, well compacted and perfectly leveled. C) Lay the Geoplast SALVAVERDE grid with the following characteristics: Grids made of PE HD, UV-resistant. Compression resistance of up to 350 tons / m2. Surface permeability: up to 95%. Thermal active joint between the grids. The grids can be driven upon as soon as the cells have been completely filled. Installation from above with double-overlap connection for maximum stability of the system. D) Execution of the turf protected by SALVAVERDE: Completely fill the SALVAVERDE cells with: blend of silica sand and vegetation soil, enriched with peat and organic humus; alternatively, blend of volcanic sand size 0-5 mm, enriched with vegetation soli and organic fertilisers. Delivery and seeding. Delivery and installation of marker caps (white or yellow) for marking parking lots, pedestrian or vehicle lanes or else. UPKEEP AND MAINTENANCE For best result wait until the grass has been cut twice before starting to drive in or park on the surface reinforced with SALVAVERDE. Regular maintenance of the turf is recommended: provide proper fertilisation, check the irrigation system and refill with vegetation soil any grid cell should the soil have sunk. The right protection for turf driveways 5 REV. 000 ST. 01/2011 Disclaimer: the values shown in this brochure are for guidance only. They are not meant to be used for design criteria. Their use and reliance thereon for any purpose by anyone is entirely voluntary and at the sole risk of the user. GEOPLAST is not responsible for any loss, claim, or damage resulting from their use. www.geoplast.it

SALVAVERDE EXECUTION OF A DRIVABLE GRAVEL SURFACE Execution of a reinforced gravel surface with the GEOPLAST SALVAVERDE grid in PE HD: A) Lay a 150 to 200 mm subbase of compacted gravel size 5-20 mm. B) Execution of the bedding for Geoplast SALVAVERDE with 30 to 40 mm of well compacted silica sand. C) Geoplast’s SALVAVERDE grid with the following characteristics: Grids made of PE HD, UV-resistant. Compression resistance equal to 350 tons per m2. Thermal active joint between the grids. Surface permeability: up to 95%. The grids can be driven upon as soon as the cells have been completely...